Project Gallery


Live Edge Black Walnut and Cherry Hayrake Dining Room Table

This was a custom item for a customer who wanted a heirloom, centerpiece table that would last for generations.  After several different concepts we settled on a design from the English Arts and Crafts movement, a Hayrake Table.  The customer asked if it would be possible to incorporate a live edge slab as the table top, to really give it a natural look.  To get to the requested width of 3 feet, I took a slab of black walnut that was already partially cracked down the center and finished the split.  A center section of cherry was then added to get us to the desired width.  The top of the table is 6 feet 5 inches long and is 2 3/4 inches thick.  The table base was all made of cherry and is joined using hand cut mortise and tenon joints. 


 

Live Edge Oak Coffee Table

 This was a fun project trying to make use of a cast off slab from a local lumber yard. Due to the unusual shape and some relatively significant splitting it was destined for a short life as firewood before I rescued it. The slab was planed flat and the split stabilized using a two-part epoxy. The tripod base was made out of matching white oak and joined using hand cut mortise and tenons. Extensive sanding and a simple danish oil were used to finish the piece. It is quite imposing in its finished state and truly commands ones attention. A rather elegant, yet simple centerpiece.

 

 

Angled Mortise and Tenon for the Hayrake Table Base.

 


Black Walnut and Curly Maple Bench

I think every piece of wood has a story and purpose, it is the art of the craftsman to find that purpose and bring it to light. I had a cast-off scrap of black walnut from a larger slab that had split and while I thought about cutting it down and using it for other projects but it just seemed to be telling me something different. I settled on making a sitting bench for the entryway of a house. The top is a black walnut that is about 3 inches thick while the legs are a curly maple with some very nice figure. The legs were hand shaped using a spokeshave and drawknife. They fit into circular through mortises in the bench top and were splined with small wedges of black walnut for the distinctive, contrasting X pattern you see in the photos. Not only does this create a nice artistic effect but the wedges also serve to slightly splay the top of the bench leg ensure it is securely locked in position. The piece really came out beautifully with a wonderful natural feel that has notes of sophistication.